Bosch FWI‑270 Installationsanleitung Seite 18

18
en | Installation
7. Label the battery pack with the date.
8. Insert the battery pack and align the position of the battery cable to
the battery connector.
Notice!
Do not connect the battery pack until you are ready to
commission the radio cell.
The gateway is mounted and ready for commissioning.
P
To close the housing:
1. Position the housing cover (1) on the top edge of the back box (6).
2. Using a screwdriver to press the lock (3) into the housing and close
the housing cover (1).
3. Tighten the screw (2) with a Torx T7 screwdriver.
The gateway is closed.
P
For opening the housing, the above steps are carried out in reverse
order.
2019.08 | 2.0 | F.01U.352.390
Radio gateway
Bosch Sicherheitssysteme GmbH