Maintenance; Residual Risks - Ryobi RY18BPSA Übersetzung Der Originalanleitung

TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.

MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, or grease.
CAUTION
Do not at any time let brake fl uids, gasoline, petroleum-
based products, or penetrating oils, come in contact with
plastic parts. Chemicals can damage, weaken or destroy
plastic, which may result in serious personal injury.
WARNING
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. Have the product serviced by an authorised
service centre only. When servicing, use only original
replacement parts.
WARNING
To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.
■ Only make adjustments or repairs that are described
in this manual. For other repairs, contact an authorised
service centre.
■ After each use, clean the product as prescribed in this
manual.
■ Drain and empty the spray tank before cleaning.
■ Drain the spray materials through the fill area.
NOTE: Drain all of the spray materials from the spray
tank into a container approved for chemicals. Do not store
chemicals in the spray tank.
■ Use clean water to clean and rinse the spray tank.
A small amount of mild household detergent may be
added. It may be necessary to rinse the spray tank
more than once.
4 | English
■ Wipe the product with a clean, dry cloth.
DISPOSAL
Never dispose of residual chemicals or contaminated
rinsing solutions in waterways, drains, sewers, street
gutters, or manholes.
Dispose of residual chemicals and used containers in
accordance with local waste disposal regulations.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ electric shock
– Never spray liquid towards electrical sockets,
cables, or appliances.
■ injury caused by contact with hazardous substances
– Spray materials may be harmful if inhaled,
ingested, or comes in contact with skin or eyes.
Follow instructions carefully and wear appropriate
protective equipment as prescribed in this manual.
■ injury caused by vibration
– Hold the product by designated handles and restrict
working time and exposure.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of the condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.