Casselin CMS2B Handbuch Seite 16

Connecting the appliance, the light up green LED powered lights.
EN
Turn the button thermostat to the desired temperature.
To switch off set the thermostat knob to "0".
Once complete use let the unit cool.
After each use, the device must be cleaned.
NOTE To insert the electric heating equipment
The device has a security system in case of overheating. Upon activation, disconnect the device and allow it
to cool. If this protection system will start regularly, it is imperative to contact your dealer.
After automatic shutdown, the unit may be commissioned only by pressing the reset button on the unit's back
for this, wait until the temperature drops, press the Reset button.