Safety Instructions - Traxon Rdm Bedienungsanleitung

Setup Manual - RDM Isolator

Safety instructions

Only use the device in compliance with the environmental condi-
i
tions specified and watch the technical characteristics. Otherwise
the unit may be damaged or malfunction will happen.
i Only use original e:cue accessories to power the RDM Isolator
Other power supplies can damage the unit.
To prevent the device from overheating, only operate it in well-
i
ventilated environment. Ventilation may not be obstructed. Do not
install next to heat emitting sources or in a place subject to direct
sunlight.
Device components inside the system can reach high tempera-
tures! To avoid burns, allow the unit to cool for at least 20 minutes
before unmount or repair.
Installation and maintenance of this product must be performed by
i
individuals who are knowledgeable about the procedures, precau-
tions and hazards associated with the product.
6