Inhaltsverzeichnis
Werbung
For PCIe-to-SAS host bus adapter installation instructions, see Appendix A,
"PCIe-to-SAS host bus adapter quick installation instructions," on page 115 or
refer to the documentation that comes with your PCIe-to-SAS host bus
adapter.
SAS hard disk drive cable
v
You will be required to use one of the following 29-pin SAS connecting
cables included in your option package to connect the SAS hard disk drive
to the power and signal ports:
– Straight connecting cable
The straight cable is for the ThinkStation D10 series computer systems.
The power port 1 and the signal cable 2 are displayed in the diagram
below.
– Right angle connecting cable
The right angle connecting cable is for the ThinkStation S10 series
computer systems. The power port 1 and the signal cable 2 are
displayed in the diagram below.
3
Chapter 1. About the ThinkStation Serial Attached SCSI (SAS) hard disk drive
Werbung
Inhaltsverzeichnis
