Before Use; Inserting / Replacing The Battery; Preparing For Use - Milomex Z31037 Bedienungs- Und Sicherheitshinweise

Safety ... / Before use / Preparing for use
Remove the battery from the product if it has not been
used for a long period.
battery, please make sure that the LC-display

Before use

Fasten the skipping rope
set the correct rope length. Proceed as shown in fig A.
Remove the insulating strips before first use.

Inserting / replacing the battery

Proceed with the insertion / changing of the battery as
shown in fig. B and C.

Preparing for use

First enter your body weight (W), so that the computer
in the handle can count the number of skips / rope
1
revolutions (L), the training duration (T) and the calorie
consumption (C).
Setting body weight:
1. Press the RESET / ON button
switches itself on.
2. Press the SET button
on the LC display
3. Enter your current body weight in kgs (20–110) by
means of the UP
10
buttons down longer to speed up the input process.
4. Press the SET button
weight.
34 GB/MT
Before you insert or change the
to the rope holder
6
. The LC display
11
. The figure in the W box (weight)
9
flashes.
2
and DOWN buttons
again to confirm the set body
9
is off.
2
and
7
2
. Hold the
8