Listening To Music; Disconnecting; Changing Ear Pads; Troubleshooting - Inline Bt Bedienungsanleitung

9.5 Listening to
Music

9.6 Disconnecting

10. Changing Ear Pads

11. Troubleshooting

Problem
Earphones cannot be
switched on
Battery cannot be
charged
No Bluetooth connection
possible
www.inline-info.com
rejected call. Then release the button
immediately, since otherwise Earphones will
disconnect the mobile phone connection.
Adjust Adjust volume during phone calls using the
volume Earphones' „+" and „-" buttons.
NOTE!
Please be aware that not all Bluetooth phones support the functions
described above. Please also review the information in your mobile
phone's User Manual. Some functions and notification tones may vary.
You may use the following function buttons for music playback during
active Bluetooth connection:
Increase the volume by holding this
+
button. The highest volume is signaled by
a tone.
A short press of the button selects the
next track.
Decrease the volume by holding down
-
A brief press of the button selects the
previous track.
Pauses and starts playback by simply
O
pressing.
Multifunction
button
Keep multifunction button pushed for some 3 seconds to disconnect the
active Bluetooth link and switch off the Earphones.
Included in the delivery of the InLine® BT woodin-ear headphones are
earpads in 3 sizes, which can be exchanged by gentle pulling on and
plugging on and thus adapted to the auditory canal size of the user.
Solution
Ensure Earphone battery is charged.
Ensure the USB power source is switched on and your PC is not in
power saving mode.
Check all connections of the USB cable at Earphones and at the USB
power source.
Ensure Earphones and the Bluetooth device to be connected are both
switched on.
Check the available Bluetooth standard of your Bluetooth device.
InLine® BT woodin-ear headphones support Bluetooth profiles HSP
Page 7 of 8