Turning On / Off; Bluetooth Connection Build-Up - Inline Bt Bedienungsanleitung

9.2 Turning ON /
OFF
9.3 Bluetooth
connection build-
up
www.inline-info.com
TIP!
When an iPhone, iPad, iPod is paired with the InLine® BT woodin-ear
headset, a battery symbol appears in the upper display area of the iPhone,
which indicates the charging status of the headset.
NOTE!
Please be aware that recharging times may vary according to the power
source output performance.
NOTE!
If you use a free USB port on your PC for recharging please ensure your
PC is switched on and not running in power saving mode.
TIP!
For recharging the battery we recommend using InLine® USB power
supplies such as the InLine® USB Power Supply 2-fold, recharging
device, power adapter, 100-240V to 5V/2.1A, available in black (Art.
31505S) and white (Art. 31505W)
To switch the InLine® BT woodin-ear headphones on or off, press the
center multifunction button for approx. 3 seconds, you will hear a short
tone sequence for confirmation.
You can build up a wireless connection between a playback device or
PC and the Earphones via Bluetooth. The playback device must have its
Bluetooth function switched on.
1) Put the earphones into pairing mode.
For this keep multifunction button pressed for at least 5 seconds.
First you hear a sound sequence for the power on, then a slightly
higher sound sequence, which signals the pairing. An alternating
flashing of the LED in red and blue signals that the headphone is
ready for the connection setup.
2) Open the Bluetooth settings of your playback device and search for
available devices. Ensure that the distance between Earphones and
the intended Bluetooth playback device is less than one meter.
Please also follow the advice in your Bluetooth playback device's
User Manual, or contact the manufacturer if any problems should
arise.
3) Select the device „InLine woodin-ear" on your Bluetooth playback
device to build up a connection. If your playback device requires a
code, enter "0000".
4) The successful connection setup is indicated by a short tone
sequence and a slow blue flashing LED.
Your InLine® BT woodin-ear headphones is now ready for use.
NOTE!
If you performed a Bluetooth connection between Earphones and a
Windows PC, these will appear twice in the sound settings.
Page 5 of 8