Using tools
- Both drill bits and screwdriver
bits can be fitted to the chuck.
- To open the chuck rotate the
chuck anticlockwise.
Using the tool
Switching on and off
To switch the machine ON:
Pull the trigger.
To switch the machine OFF:
Release the switch trigger.
The speed can be infinitely
adjusted by varying the pressure
exerted on the trigger.
LED worklight
The tool is equipped with an LED
worklight that facilitates working
in inaccessible, dark places.
The LED worklight illuminates
immediately after holding down
the power switch and turns off
once you release the switch.
K620158_Anleitung_D,GB,F,CZ.indb 41
41
5
11.10.16 10:31