External Cleaning - Tecfrigo MEAT 250 Zusammenbau Und Betrieb

Operator's guide:
1. Unpacking instructions
2. The handle
3. Grid shelves
I
4. The drip trays
5. Internal cleaning
UK

6. External cleaning

7. Connection to the mains
D
8. Controls
9. Checking correct operation
E
10. Internal cleaning
F
!
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
NL
reference and for reasons of safety. 1. Adults should operate this appliance only. Do not allow children
to use the controls or play with it. 2
P
characteristics of this appliance. . The electrical installation of the appliance should be carried out by a
qualified electrician or other competent person. . Never attempt to carry out repairs unassisted. Inexpert
S
repairs can cause serious damage and malfunction. . Assistance has to be provided by an authorized
engineer only. Always use original spare parts. . This appliance is not suitable for the storage of basic
DK
commodities not including food-stuffs. . The manufacturers of this appliance accept no responsibility for
the consequences of misuse in contravention of these safety instructions. It further reserves the right to
FIN
carry out improvements without prior notice. 8
9 . Nevere install the appliance near sources of heat (such as radiators, stoves, etc) and drafts (such as
windows, doors, ventilation systems, air conditioning, etc ...).
B
obstruction for at least 30 cm.
hang over the edges.
GR
evaporator, we recommend stopping the compressor and placing the goods in special refrigerated
containers,kept at the same temperature,until defrosting is completed;if this is not carried out the
CZ
compressor will continue to operate leading to a wasteful consumption of electricity and poor
performance.
EE
least 10 cm.
LV
!
Our products are for internal use only do not install outside restaurants, shops.
LT
1. UNPACKING INSTRUCTIONS
H
CARDBOARD PACKAGE 1a
Remove the nails from the wooden crate with care. . Take out the box containing the shelves. . Insert
M
the forks of a forklift truck between appliance and pallet or crate.
pallet or crate.
PL
means of the adjustable foot (only model 1150).
disposal. 8. Separate the packaging materials to facilitate disposal (see figure 1).
SK
2. THE HANDLE
SLO
1. The handle can be found inside the appliance in a bag. . Fix the metal part of the handle to the door
frame using the two screws already inserted in the holes. Tighten with care. . Place the plastic insert
over the metal handle and press down until it clicks into place (see figure 2).
3. GRID SHELVES
1.
The brackets, you will find in a cardboard box, should be inserted into the supports on the special
posts. Fit the mirror shelf at the bottom first. . The shelves should be fastened in place with the screws
you will find in the bag inside the appliance, with the plastic parts facing the glass. Tighten with care (see
figure 3).
4. THE DRIP TRAYS
Take the plastic tray from inside the appliance and slide it in the guides underneath the appliance itself:
- One for Meat 550 M. - Two for Meat 1150 M
5. INTERNAL CLEANING
1
. Clean the inside and glass panels with a soft cloth and neutral detergents. . Dry with a soft cloth (see
figure 5).
6. EXTERNAL CLEANING
1. Use the same products as used for the internal cleaning. . Remove the protective film from the steel
panels and grilles (see figure 6).
. It is forbidden to modify in any way the main functions and
3
7
11 . Ensure that the products displayed on the shelves and grills do not
12 . If damp air or products to be refrigerated should cause ice to form on the
13 . If the appliance is not working and unused, it is indispensable to keep the door open at
Cut the strap and lift up the cardboard package.
6. Place the appliance on a flat and level surface and make any level adjustments by
Operator's guide
11. Manual defrosting
12. Replacing the door's magnetic gasket
Maintenance manual (Page 48):
1. Cleaning the condenser
2. Replacing the internal lights
3. Replacing a glass panel
4. Wiring diagram diagram of refrigeration unit
4
5
6
. Avoid installing the cabinet directly in line with sunlight.
10
. Keep the ventilation grills free from
2
4.
7. Make sure there is nothing left in the package before
2
2
(see figure 4).
2
6
WOODEN CRATE 1b
Lift the appliance. . Remove the 5
3
2
3