Inhaltsverzeichnis
Werbung
* It is recommended to install the USB Keyboard/Mouse cable to USB 2.0 ports (USB_1_2 or
USB_3_4) instead of USB 3.0 ports.
** There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indica-
tions.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Description
Off
No Link
Blinking
Data Activity
On
Link
*** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See
the table below for connection details in accordance with the type of speaker you use.
Audio Output
Speaker
Channels
(No. 7)
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to
the front panel audio header. After restarting your computer, you will find the
"Mixer" tool on your system. Please select "Mixer ToolBox"
playback multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or
"8CH" and then you are allowed to select "Realtek HDA Primary output" to
use the Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek
HDA Audio 2nd output" to use the front panel audio.
Speed LED
Status
Off
Orange
Green
Front
Rear Speaker
(No. 5)
V
--
V
V
V
V
V
V
FM2A88M Extreme4+ R2.0
Description
10Mbps connection
100Mbps connection
1Gbps connection
Line In or
Central / Bass
Side Speaker
(No. 4)
(No. 6)
--
--
V
V
, click "Enable
--
--
--
V
5
Werbung
Inhaltsverzeichnis
