Safety Information - LG ART#51 Kurzanleitung

Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING:
To prevent fire or electric shock hazard, do not expose this product to rain or moisture.
y
Do not install this equipment in a confined space such as a book case or similar unit.
y
This unit contains magnets which can be harmful to some kind of object
y
(Ex : Magnetic card, Pacemaker etc..).
CAUTION:
Do not block any ventilation openings. Install in accordance with the manufacturer's
y
instructions. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from over heating. The openings shall
be never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's instruction has been adhered to.
The apparatus should not be exposed to water (dripping or splashing) and no objects filled
y
with liquids, such as vases, should be placed on the apparatus.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
y
It is recommended that you use the 5 V AC adapter (more than 1.8 A) with this device.
y
If you do not use the recommended adapter, charging is unavailable or charging time may
differ.
To avoid fire or electric shock, do not open the unit. contact to qualified personnel only.
y
Do not leave the unit in a place near the heating appliances or subject to direct sunlight,
y
moisture, or mechanical shock.
To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth
y
lightly moistened with a mild detergent solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might damage the surface of the unit.
2