Troubleshooting - Toshiba PX1215E-1NAC Benutzerhandbuch

E-Mouse
■
1000 true optical Dot-Per-Inch resolution
■
Blue LED
■
2 independent mouse buttons
■
Built-in rechargeable Li battery
■
10 meter / 30 feet transmission distance
■
Built-in 3-stage power-save feature
■
Laser presenter with Page Up and Page Down functions.

TROUBLESHOOTING

Symptom
System does not
recognize the USB
Receiver.
E-Mouse does not
light up.
Mouse Pointer does
not move.
User Manual
Cause/Solution
System does not meet product requirement. ->
Upgrade system or move to a different computer.
USB port is malfunction. -> Use a different USB
port.
Battery power is too low. -> Charge up the
battery.
E-Mouse is still in Presenter Mode. -> Wait for
10 seconds.
E-Mouse is in Stage Three Power Save Mode. ->
Click on the button once.
Power is turned off -> Press down both buttons
for 10 seconds to turn power on.
Work surface is reflective. -> Use a non-reflective
work surface.
Battery power is too low. -> Charge up the
battery.
Communication setting on the E-Mouse may be
changed. -> Reset the transmission setting. (See
Hardware Setup, Sec. B)
E-Mouse LED is off. -> Fix the LED problem.
(Symptom 2)
E-Mouse tilt angle too big. -> Make sure the
focus line is in contact with the work surface.
9