Product Care; Product Specifications - Toshiba PX1215E-1NAC Benutzerhandbuch

To turn on the power of the handheld unit, press down the Left Button and
the Right Button at the same time for 10 seconds and wait for the Blue LED
to turn on.
You DO NOT have to reinstall the device or reset the communication
channel between the handheld device and the receiver after turning off the
power.
E. Using the Laser Presenter Function
Hold down the Channel Select Button B and press down the Laser
Pointer Button once will put the E-Mouse into the Presenter Mode.
In the Presenter Mode, the Blue LED is turned off, the Right Button
becomes the Page Up button, and the Left Button becomes the Page Down
button.
Hold down the Channel Select Button B and press the Laser
Pointer Button once again will switch the E-Mouse back to the
Mouse Mode.

PRODUCT CARE

There are no user-serviceable parts in this product and you should not
disassemble it under any circumstances without proper training/
authorization. Following the safety guidelines in the Safety Caution Section
and this product should last for a long time. Occasional cleaning with a
slightly damped soft towel on the outside will help keep its appearance in
good condition.

PRODUCT SPECIFICATIONS

2.4 GHz RF technology based rechargeable 2 button pen-style USB
wireless optical mouse.
Laser presenter with Page Up and Page Down functions.
System Requirements
■
Windows 2000 or XP with a USB port,
Dongle Receiver
■
USB 1.1 interface
■
Dimension: 57mm x 18mm x 9mm
8 User Manual