Getting Help; Connecting Your Phone To The Car Kit - Motorola IHF1000 Hier Beginnen

Press and Release
In This Situation ... Press and Release END to ...
during an active call end the call
when system is awaiting cancel Speech recognition
a command during mode
Speech recognition mode
when receiving an reject the call
incoming call
Press and Hold
In This Situation ... Press and Hold END to ...
during an active call end all calls
(including multi-party
calls)
when system not on a
terminate the Bluetooth
call
connection
Volume UP/DOWN Buttons
During normal operation, press and release the Volume
UP/DOWN buttons to increase or decrease speaker
volume.
(If the system is using the vehicle radio speakers, you can
also use the radio's volume controls to raise or lower
volume.)
To mute the microphone, press and hold either Volume
UP/DOWN button. To unmute the microphone, press and
release either button.
®
21 22

Getting Help

While learning to use the system, or whenever you need a
reminder, say "Help." The system includes Help prompts in
every menu.
You can also say "Repeat" whenever you are prompted for
a Yes or No. The system will repeat the question.
Note: If you need to reset the system, press and hold the
TALK and ANSWER buttons simultaneously for more than
2 seconds.
Connecting Your Phone to the
Car Kit
Before you can use this car kit, you must complete a
®
Bluetooth connection between the kit and your phone.
You establish a Bluetooth connection between your car kit
and phone with a paired link.
When you set up a paired link, the car kit remembers the
phone's ID. Once the car kit and phone are paired, your
car kit automatically connects to your phone every time
you start your vehicle or power up the car kit.
This system supports paired links with up to 4 phones.
Note: The process of initiating a Bluetooth connection with
a phone varies per phone manufacturer. For more
information, refer to the user's guide for your phone.