Description Of The Product - Concept MS7210 Bedienungsanleitung

EN

DESCRIPTION OF THE PRODUCT

1. Massage head with infrared lamp
2. Massage surface
3. Flexible turning neck
4. Joint bending button
5. Mode selector
6, 7. Body, neck and head
massage extensions
8. Muscle massage extension
9. Massaging brush
10. Supply cable
NOTE
• Pregnant women, diabetics, people suff ering from varicose veins and ill people should consult their doctor prior
to use.
• A massage should be a pleasant and relaxing experience. If you feel pain, or any discomfort, consult your doctor.
• Do not use the unit on irritated, burnt or swollen places, injured skin or a rash. Avoid direct eff ects of the massage
on joints, spine, front of the neck and face. If you have a cardiac stimulator installed, avoid the heart area.
• Do not use the unit for more than 20 minutes. Let it cool down for at least 20 minutes after use.
Prior to using a new unit, wipe the surface with a wet cloth and wash the accessories in warm water for hygienic
reasons.
OPERATING INSTRUCTIONS
1. Uncoil the supply cable.
2. Connect the plug of the power cord to the wall outlet.
3. You may adjust the shape of the unit according to massaged spot. The massaging head is rotary, and the handle's
angle can be adjusted by pressing the joint button.
4. Select the required massage, or infrared mode.
Mode selector positions:
0 – Off .
1 – Massage – Use the extension on the massaged spot according to the required massage mode.
2 – Infrared lamp – prior to use on the selected spot, check the massage head temperature. The temperature can be
regulated by switching the unit on and off .
3 – Massage and infrared lamp – prior to use on the selected spot, check the massage head temperature.
5. Do not use the unit for more than 20 minutes. Let it cool down for at least 20 minutes after use.
6. Switch the mode selector to the
MS7210
2 3
1
O
position (off ), and disconnect the unit from the wall outlet after use.
4 5
6 9 8
10
7
17