Inhaltsverzeichnis
Werbung
COMPONENTS PL68:
1. Main switch
2. Metering lever
3. Locking pin of the grinding ring nut
4. Grinding ring nut
5. Supporting elements for the right positioning of the filter holder
6. Coffee bean bowl
USER INSTRUCTIONS
Before using the machine please check:
•
that the voltage corresponds to the voltage required as stated on the technical data label, on
the bottom of the machine.
•
that the coffee bean bowl is on the grinder. In case it's not, please attach it to the grinding
regulator by means of the screw (pos. A, pic. 2)
•
that the main switch is off and that the machine has been plugged in.
•
that the beans bowl (1) contains coffee beans.
Starting the machine:
1.
Press the locking pin (2) of the grinding ring nut and, in order to regulate the grinding, rotate
the grinding ring nut clockwise to obtain a fine grinding, anti-clockwise to obtain a gross
grinding.
2.
Stop rotating it once you found the desired grinding degree.
3.
Press the main switch (1) to start the grinding. To stop it return the switch to the rest position.
4.
To get the ground coffee in the filter holder, position the filter holder on the supporting
elements (5) and move the metering lever (2).
5.
Once you obtained enough ground coffee, remove the filter holder.
ROUTINE MAINTANCE AND PRECAUTIONS:
The grinding degree is the most important thing in order to obtain a creamy coffee. This
-
degree changes according to the coffee blend.
Please replace, once worn out, the mills.
-
In order to change the mills, please contact an authorised service centre.
-
Do not put the machine under water.
-
Do no put any parts of the grinder in the dishwasher. Just use neutral soap and water to wash
-
the bean bowl.
TECHNICAL DATA:
Voltage:
220/240 V ≈ 50 Hz ▪ 110/120 V ≈ 60 Hz
Power:
100 W
Weight:
7 kg
Bean bowl capacity:
Ground coffee bowl capacity:
Pag. 8
:
250 gr
130 gr
English
Werbung
Inhaltsverzeichnis
