Seite 1
Montage System – ID21 assembly system – ID21 BASIC-SET EU System – ID21 79465 (c) Seite 1 25.01.2016...
Seite 2
Montage System – ID21 assembly system – ID21 BASIC-SET EU Teileliste – Normteile, L- und T-Fuß Screwkit „C ID-01“ parts list – standard parts, L- and T-foot Screwkit „C ID-01-FID-02L/T“ Screwkit „C ID-01-FID-01L/T“ Senkkopfschraube Abdeckkappe M6x20mm SW4 30x30mm countersunk head screw...
Montage System – ID21 assembly system – ID21 BASIC-SET EU Teileliste – Seitenprofil, Rahmen parts list – side profile, frame C ID-A C ID-A Tischrahmen Seitenprofil desk frame side profile Werkzeuge tools System – ID21 79465 (c) Seite 3 25.01.2016...
Seite 4
Montage System – ID21 assembly system – ID21 BASIC-SET EU Teileliste – Steuerung, Hubsäule, Handschalter, Netzkabel parts list – control unit, lifting column, handswitch and mains power cable Steuerung SMARTeco control unit SMARTeco Handschalter MOTION ASSIST handswitch MOTION ASSIST Hubsäule ID21...
Seite 5
Montage System – ID21 assembly system – ID21 BASIC-SET EU M6 x 20mm SW4 (Drehmoment 10Nm) M6 x 20mm AF4 (Torque 10Nm) System – ID21 79465 (c) Seite 5 25.01.2016...
Seite 6
Montage System – ID21 assembly system – ID21 BASIC-SET EU Hinweis: Beachten Sie die Stärke und das Material der Tischplatte. Eine Senkkopfschraube Ø5mm wird empfohlen. notice: Please observe the thickness and the material of the tabletop. A countersunk head screw Ø5mm is recommended.
Seite 7
Please observe the thickness and the material of the tabletop. A lens head screw Ø3,9mm is recommended. Hinweis: Beachte auch die Montageanleitung System ID21! Notice: Also note the Installation Instructions System ID21! System – ID21 79465 (c) Seite 7 25.01.2016...