Berker 7571 00 03 Bedienungsanleitung Seite 37

Operation
Activating the temporary manual control mode
Keypad operation is programmed and not disabled.
Press the

01 is displayed, LED
- or
bc is displayed: The device is not programmed; all DALI de-
vices connected are controlled in common. In this broadcast
mode it is not possible to control DALI devices individually.
After 5 s without key-press, the device returns automatically to
the bus mode.
Deactivating the temporary manual control mode
The device is in the temporary manual control mode.
No key-press for 5 s.

- or
Press the

the temporary manual mode.
The display is off.
key briefly < 1 s.
remains off.
key briefly < 1 s several times until the device quits
GB
37