Cleaning And Maintenance; Troubleshooting - Concept AC7020 Bedienungsanleitung

EN
5. After a certain period of time, the temperature inside will decrease by a maximum of 18 °C compared to the external
temperature.
6. If you are not going to use the unit, disconnect the power cord.
POWER SAVING RECOMMENDATION
• Choose a well-aired place, protected from direct sunlight.
• Before storing hot food, let it cool down.
• Do not open the fridge more often or for longer than necessary!

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the socket!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may
damage the unit's surface!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!

TROUBLESHOOTING

Problem
The unit does not work, the vent
wheel does not rotate – visible from
outside.
The ignition is on, but the fridge
does not work. Take out the plug,
and check the following:
The car fridge does not perform
satisfactorily, and the vent wheel
does not rotate.
The car fridge does not perform
satisfactorily, and the vent wheel
does not rotate.
Fig. 3 - Replacing the fuse
AC7020
Possible cause
There is no voltage in the cigarette
lighter socket.
The cigarette lighter base is dirty.
This causes incorrect electric
contact.
The cigarette lighter socket fuse is
burnt.
The vent motor is damaged.
The inner ventilator or cooling
element is damaged.
The integrated power supply is
damaged.
Solution
In most cars, the ignition must be on
to activate the cigarette lighter.
If the car fridge plug in the base is
too hot, either clean the base, or the
plug must be re-assembled.
Replace the cigarette lighter fuse
(5A), Fig. 3.
Only an authorized service may do
the repair.
23