Installing The Product; Declaration Of Conformity - nedis IREX050BK Kurzanleitung

•
If the power cable is damaged, it must be replaced by a special
cable or assembly available from the manufacturer or its service
agent.
•
Only use provided parts.

Installing the product

4
Make sure all the devices you want to connect have been
switched off.
1. Plug the IR extender A
2. Secure the cable of the IR receiver A
3. Plug the cable of A
8
4. Place A
5. Place the IR Remote Control Extender A
device.
6. Plug the Micro USB - USB cable A
4
7. Plug A

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product IREX050BK
from our brand Nedis
according to all relevant CE standards and regulations and that all
tests have been passed successfully. This includes, but is not limited
to the RED 2014/53/EU regulation.
3
8
into the infrared receiver port Rx A
near the remote.
into a power source.
, produced in China, has been tested
®
into the infrared receiver port Tx A
8
using the hooks.
1
4
into the USB port A
7
3
and A
near your
2
7
.
6
.
.