Herunterladen Inhalt Inhalt Diese Seite drucken

Installationshinweise - ECX VN610 MT-U1 Installationsanleitung

Inhaltsverzeichnis

Werbung

INSTALLATION NOTES / Installationshinweise
14
15
8
Handbrake connection:
Connect the cable from the handbrake connection (14) with the handbrake
signal in your vehicle. The signal must be connected with ground while the
handbrake is applied. Please contact for a proper and safe installation your car
dealer! According to legal regulations, the device must playback a DVD or video
on the main screen only with the handbrake applied, Never connect the the
cable permanently with the vehicle's ground. To prevent accidents by inatten-
tion while driving, the screen is blanked. The video outputs (7) are not affected.
Handbremsen-Anschluss:
Schließen Sie den Handsbremsen-Anschluss (14) an das Handbremssignal im
Fahrzeug an. Das Signal muss bei angezogener Handbremse auf Masse liegen.
Bitte wenden Sie sich für eine korrekte und gefahrlose Installation an Ihre KFZ-
Fachwerkstatt! Gemäß den gesetzlichen Bestimmungen darf das Gerät eine
DVD bzw. Videowiedergabe auf dem Hauptbildschirm nur bei angezogener
Handbremse wiedergeben, das Anschlusskabel darf deshalb nicht dauerhaft
auf Masse angeschlossen werden. Während der Fahrt wird der Bildschirm zur
Vermeidung von Unfällen durch Unachtsamkeit dunkel geschaltet. Die Video-
ausgänge (7) sind hiervon nicht betroffen.
TMC cable antenna:
Connect the enclosed TMC antenna (15) with the USB port on and then lay
the antenna. For optimal reception it should be fastened to the windscreen
by using the suction cups, a hidden installation e.g. under the A-pillar or the
dashboard is also possible.
TMC Kabelantenne:
Schließen Sie die beiliegende TMC Antenne (15) an den USB Anschluss an
und verlegen Sie dann die Wurfantenne. Für optimalen Empfang kann diese
an der Scheibe mithilfe der Saugnäpfe befestigt werden, auch ein verstecktes
Verlegen z.B. unter der A-Säule oder unter dem Armaturenbrett ist möglich.
AUX / USB Port:
if your car is equipped with a factory AUX and USB port, the port is supported
by the device. Refer to the included manual how to use the ports. The AUX port
is selectable on the device in the APP menue under AUX.
AUX / USB Anschluss:
Sollte Ihr Fahrzeug über einen werksseitigen AUX- bzw. USB-Anschluss ver-
fügen, wird dieser vom Gerät unterstützt. Entnehmen Sie die Handhabung der
Anschlüsse der beiliegenden Bedienungsanleitung. Der AUX-Anschluss ist am
Gerät im Menü APPS unter AUX anwählbar.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis