Herunterladen Inhalt Inhalt Diese Seite drucken

CLIMASTAR 3IN1 COMFORT Bedienungsanleitung Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1. INTRODUCTION
2. WALL SUPPORT
3. SETTING UP
4. MAINTENANCE
5. TECHNICAL CHARACTERISTICS
6. FAQs
7. GUARANTEE
1- INTRODUCTION
- Please, read carefully this user's guide before installing your device.
- Make sure the supply voltage corresponds with that on the nameplate (located on the left side of the device).
- The Schuko plug must be connected to a compatible Schuko socket.
- Do not place the device right under an electrical outlet.
- If the supply cord is damaged, it must be replaced by the manufacturer, its after sales service or any other qualified person.
- Not intended for children under the age of 3 unless duly supervised.
- Children over 3 and below the age of 8 must only turn on/off the device whenever it has been duly placed or installed, has
been give supervision or instructions concerning use of the appliance. Children from 3 to 8 must not plug, regulate and clean
the device, nor carry out any maintenance activity.
- Not intended for use by persons (including children over 8) with reduced, physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must not play with the device. Cleaning and maintenance must not be carried out by
children without prior supervision.
- WARNING: some parts of this device may overheat and cause burns. Pay special attention when children and vulnerable
people are around
- To avoid possible overheating, do not cover the device
2- WALL SUPPORT
- The device includes a mounting kit with the required hardware -rawlplugs and 6 mm screws- and the wall support.
- The rawlplugs supplied with the mounting kit cannot be used on dry walls. For this type of wall, special rawlplugs must be
used.
- When installing the device on the wall, the distance indicated below must be considered:
- Once decided the location to install the device, remove the packaging and extract the device and its mounting kit
- Fix the radiator to the wall using the box as a pattern as indicated below:
INDEX
UK
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis