Care And Cleaning; Declaration Of Conformity (Doc) - Renkforce 2147375 Bedienungsanleitung

b) Pairing the music receiver
The music receiver and mobile device must be operated within the transmission
range of 30 meters. Note that interference may be caused by furnishings, walls, or
electronic devices located between the music receiver and the mobile device. Never
cover the music receiver.
• This music receiver can store up to 8 paired mobile devices (such as a smartphone, tablet).
Once the memory is full, the first device is deleted so that a new mobile device can be
stored. However, the connection can only be made with one mobile device at a time.
• Connect the micro USB plug of the power supply to the micro USB port DC 5V (4). Insert
the mains plug into a mains socket. The LED indicator flashes and is now in pairing mode.
Do not use a USB port for the power supply, for example from a computer, a
keyboard or fa USB hub without its own power supply, since the available power is
not sufficient here.
• Activate the Bluetooth function on your mobile device (e.g. smartphone) and start the
search function for Bluetooth devices (read the manual of your mobile device if necessary).
• Select "HD Receiver" from the list of found devices to pair the devices. As soon as the
pairing is successful, the LED lights steadily.
Follow the instructions in your mobile device.
If your music receiver cannot be connected, check if the Bluetooth feature is enabled
on your mobile device and the music receiver is within 30 meters of transmission.
• Follow the same procedure as the first mobile device to pair a second mobile device.
• The music receiver can only be connected to a mobile device at a time and play the music.
Start playing music on your mobile device. The music receiver plays the music via the
connected output (e.g. headphones or music system).
• Disconnect the music receiver from the power supply when not in use.
• Turn off the Bluetooth function after using it on your mobile device.

Care and cleaning

• Trennen Sie das Produkt vor Reinigungsbeginn von angeschlossenen Geräten.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the casing or cause the product to malfunction.
• Never submerge the product in water.
• A dry, soft and clean cloth is sufficient for cleaning. Do not press too hard on the housing,
as this can lead to scratch marks.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to Directive 2014/53/EU.
Click on the following link to read the full text of the EU Declaration of Conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol, and then enter
the product order number in the search box. The EU Declaration of Conformity is
available for download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
a) Music receiver
Input voltage/current ..................... 5 V/DC, 600 mA via micro USB
Stereo audio ports ........................ 1x 3.5 mm jack, 1x optical (Toslink)
Bluetooth version .......................... 5.0
Bluetooth profile ............................ A2DP
Codec ........................................... SBC, aptX, aptX Low Latency, aptX HD (48 kHz/24 Bit)
Frequency response ..................... 20 Hz - 20 kHz ± 3 dB
Signal-to-noise ratio ...................... > 95 dB
Distortion factor ............................ < 0.05 %
Transmission frequency................ 2.402 – 2.48 GHz
Transmission power...................... 0 - 7 dBm
Bluetooth transmission range ....... up to 30 meters (line of sight)
Operating conditions ..................... 0 to +43 ºC, 0 - 30% RH (at room temperature)
Storage conditions ........................ 0 to +60 ºC, 0 - 30% RH (at room temperature)
Dimensions (W x H x D) ............... 75 x 20 x 69 mm
Weight .......................................... approx. 52 g
b) Adaptor
Input voltage/current ..................... 100 - 240 V/AC, 50/60 Hz, 150 mA
Output voltage/current .................. 5 V/DC, 600 mA
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2147375_v1_1019_02_hk_m_en