Cleaning And Maintenance - Tristan Auron Superfast Bedienungsanleitung

temperature.
6. After a few minutes, the temperature indicator will extinguish, it indicates the soleplate
temperature has achieved the selected temperature. When the indicator of selected steam rate
changes from flashing to illuminating, it indicates that the iron is ready for ironing garment
with steam.
7. Press the steam trigger with a little force, the steam will be sprayed from the soleplate
continuously, and then you can iron the garment with steam.
8. Quickly press the steam trigger twice to produce shot of steam if you need to remove hard
crease.
Note: There may be dripping water during spraying steam when the temperature of the
soleplate is at and lower than the second setting. This is normal.
Caution:
1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
3) Do not activate the steam trigger when the iron is placed on the unit base to avoid
being scalded by steam.
9. After ironing, press down the power button for more than 2 seconds, the appliance will be
turned off and all the indicators will extinguish. Remove the plug from the wall socket. But
the soleplate is still hot, never touch it with hand, place it on the thermal insulation stand
until it cools down completely.

CLEANING AND MAINTENANCE

Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe the residues and any other deposits on the soleplate with a damp cloth or a
non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the unit base
and the thermal insulation stand with dry cloth.
3. Remove the water tank, upend the unit base and put it on a flat surface, then anticlockwise
rotate the knob at the bottom of unit base to remove it (see Fig.5) .
8