Backlight - AEG rc 4000 Bedienungsanleitung

Favourites
This function allows preferred channels to
be selected. It is possible to program up to
15 favourite channels.
Note:
This function should only be used in a TV
and SAT mode.
Program favourites
1. Press and hold the FAV.CH key (24)
until the LED extinguishes briefl y.
2. Enter the channel number.
3. Subsequently press the FAV.CH key to
store the channel.
4. Repeat steps 2 - 3 until all favourite
channels have been entered.
5. Press the EXIT key (8) to leave the
programming mode.
Select favourites
Repeatedly press the FAV.CH key to run
through the programmed favourites in
succession.
Note:
If no favourites are programmed, the LED
will fl ash 4 times rapidly.
Delete favourites
1. Press and hold the FAV.CH key until the
LED extinguishes briefl y.
2. Press the selection key twice (e.g.
to delete the list of favourites. The LED
will fl ash 4 times slowly.
Macro function
It is possible to program a series of keys
at the push of a button. Up to 6 of these
macros can be programmed on the number
keys 1 - 6.
Program macro function
1. Press and hold the MACRO key (25)
until the LED extinguishes briefl y.
2. Press the required number key to be
programmed (e.g. 1).
3. Start programming using the respective
selection key (e.g.
press the individual keys to be
programmed.
)
). Subsequently
Note:
Only one key sequence of 16 keys,
including the selection key can be
programmed. After pressing the
16th keys, macro programming is
automatically stored.
4. When all keys to be programmed have
been pressed, press the MACRO key to
store. The LED will fl ash 4 times slowly.
Note:
The EXIT key cannot be programmed in a
macro function.
Activate macro function
1. Press the MACRO key.
2. Subsequently press the respective
number key (1 - 6), the macro function
of which is to be activated. The LED will
start to fl ash.
3. When the macro function has been
completed, the LED extinguishes.
Delete macro function
1. Press and hold the MACRO key (25)
until the LED extinguishes briefl y.
2. Press the EXIT key (8) and subsequently
the number key, the macro function of
which is to be deleted.
3. Confi rm the deletion by pressing the
OK key (16). The LED will fl ash 4 times
slowly.
Child lock
It is possible to lock the CH+/- keys and
the number keys on the universal remote
control.
1. Press and hold the FAV.CH key (24)
until the LED extinguishes briefl y.
2. Enter the digits "999" with the number
keys.
3. Press the FAV.CH key again to activate
the child lock. The LED will fl ash 4 times
slowly.
To deactivate the child lock, repeat steps
1 - 3.

Backlight

The keypad lighting can be switched on
and off with the light key (3).
When the keypad light is switched on,
the backlight illuminates each time a key
is pressed. This extinguishes after about
English
47