Inserting The Batteries; Programming The Remote Control - AEG rc 4000 Bedienungsanleitung

21 PIP:
Activates the PIP (picture in picture)
function if the TV has a PIP function.
22 MENU:
Menu display.
23 GUIDE:
Displaying the programme manager
(EPG) if this function is supported.
24 FAV.CH:
Displaying favourites if this function is
supported.
25 MACRO:
Saving and activating macro function.
26 -/- -:
One or two-digit programme location
selection.
27 Number keys
28 Mute
29 LED indicator
Introduction
This universal remote control is suitable for
virtually all commercially available brands.
The 8 in 1 universal remote control can be
used for operating up to 8 devices (TV/DVD/
SAT/VCR/HIFI/PC/DVR/AUX).
The universal remote control controls all
essential basic functions of your devices.

Inserting the batteries

The universal remote control requires 4
AAA R03 batteries.
1. Open the battery compartment at the
back of the remote control.
2. Insert the 4 batteries in the battery
compartment noting the polarity
indicated in the battery compartment.
3. Close the battery compartment.
Note:
• If the remote control is not used for
an extended period of time, remove
the batteries to prevent the leaking of
battery acid.
• Replace batteries within 2 minutes to
prevent programming loss.
• When replacing the batteries, do not
press any of the function keys as this
can give rise to programming loss.
Attention:
• Diff erent battery types or new and
used batteries may not be used
together.
• Batteries do not belong in household
waste. Please take the exhausted
batteries to an appropriate collection
point to a dealer.
Warning:
• Do not expose batteries to high
temperatures or direct sunlight. Never
throw batteries in a fi re. There is a risk of
explosion!
• Keep batteries out of the reach of
children. Batteries are not toys!
• Never open batteries with force.
• Avoid contact with metallic objects.
(Rings, nails, screws, etc.) This is a risk of
short-circuit!
• A short-circuit will cause batteries to
become very hot or even ignite. There is a
risk of burns.
• For your own safety, the battery
terminals should be covered with
adhesive tape during transport.
• If a battery should leak, do not rub
the liquid into the eyes or mucous
membranes. In the event of contact,
wash hands, rinse eyes with clear water
and if symptoms persist seek medical
advice.

Programming the remote control

The universal remote control off ers two
programming options. Setting via "Code
Search" and "Learn function".
Note:
The PC functions are preprogrammed and
cannot be altered.
"Code Search" function
1. Switch on the device you want to
operate (e.g. TV). If you are using a
video recorder, DVD or CD player, insert
a cassette or DVD/CD.
Note:
The Code Search function is only possible
in TV, SAT, DVD and VCR mode.
English
45