Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• TOUCH CONTROL (Fig. 7)
E
A
D
C
A. On/Off key
B. Lock key
C. Zone [+] key (increase power)
D. Zone [-] key (decrease power)
E. Cooking Zone Display
F. Timer Display
G. Timer [+] key (increase value)
H. Timer [-] key (decrease value)
• SWITCHING THE APPLIANCE ON
Press the On-Off key to switch the hob on.
All the displays relative to the cooking zones
switch on in the «0» standby position.
The control unit remains active for 10
seconds. If no cooking zone is selected
within this time, the appliance switches off
automatically.
• SWITCHING A COOKING ZONE ON
Select the desired cooking zone and press
one of the Zone [+] keys.
Press the Zone [-] key to go to position 9
(max. power) or Zone [+] key to go to position
1 (min. power). Once this operation has been
completed you can adjust the temperature
with the Zone [+] and [-] keys. The power
of the single cooking zone can be adjusted
in 9 different positions and will be shown on
the relative luminous display with a level from
«1» to «9».
• POT DETECTION « »
This cooktop is fitted with an interactive
control system that makes it very easy and
comfortable to use. If the cookware is removed
from an active cooking zone, the display
shows the symbol « » which disappear when
the cookware is repositioned on the cooking
zone, continuing with the previous settings.
After use, always bring power to «0» (do not
leave on the symbol « »). The symbol «
» also appears on one of the cooking zones
F
H
G
B
displays when:
1)The recipient being used is not suitable for
induction cooking.
E
2)The diameter of the recipient used is inferior
to that allowed by the appliance.
• RESIDUAL HEAT «H»
D
C
If the temperature of the cooking zone is still
high (over 50°) after it has been switched off,
the relative display will indicate the «H» symbol
(residual heat). The symbol will only switch off
when the burn risk in no longer present.
• QUICK HEATING/POWER BOOST «P»
This function further reduces cooking time
of a given area taking the temperature to the
maximum power for a 10 minute interval.
At the end of this interval, the cooking area
power automatically returns to level «9».
The use of this function is indicated for the
short time heating of large quantities of liquid
(eg. water for cooking pasta) or dishes.
To activate this function, select the cooking
zone and press the Zone [+] key up to level
«9». Press the Zone [+] key again.
An acoustic signal will be emitted and the
symbol «P» will be shown on the relative
Cooking Zone display.
• TIMER
This function allows establishing the time
(from «01» to «99» minutes) for automatically
switching the selected cooking zone off.
Switch on at least one cooking zone and
adjust the temperature. Press simultaneously
the Timer [+] and [-] keys to enter the timer
function. Press again the Timer [+] and [-]
keys simoultaneously to select the cooking
zone on which you want to activate the timer.
The selected cooking zone will be indicated
by a flashing led located on one of the corners
of the Timer Display.
Set the auto switching off time by pressing
the Timer [+] or Timer [-] key. The cooking
zone on which the timer has been activated
is indicated by a steady led at one of the
corners of the Timer Display.
An acoustic signal will indicate the timer
expiration and the relative cooking zone will
automatically switch off. Press any of the
keys to stop the acoustic signal.
11
Werbung
Inhaltsverzeichnis
