Remove The Stands - Sharp AQUOS AN-65AG1 Bedienungsanleitung

Remove the stands

• Be sure to use at least 3 people for the work from this point onward.
Caution
• Be very careful when holding the Liquid Crystal Television at a slant or when lifting it up.
■
The LC-65GE1 (Separate type) is used as an example for the following explanation. The procedure is the same
for the LC-65D90U (Integrated type).
Lift up the Liquid Crystal Television and remove the stand.
1
While the stand is being held down, lift up the Liquid Crystal Television to remove it from the
stand.
*Remove the Liquid Crystal Television from the stand while tipping it backward slightly.
Temporarily place the Liquid Crystal Television on a cushion or soft material and install
2
the stand hole covers that are included with the Liquid Crystal Television.
Hold the Liquid Crystal Television at a slant and align the stand hole covers (included with the
Liquid Crystal Television) with the stand insertion locations.
Use the screws removed during Step 3 on page 5 (page 7 for the Integrated Type) to attach
the stand hole covers and speaker cables. (The integrated type does not have to attach the
speaker cables.)
E-10
Hold down the stand so that
it does not move.
Stand hole cover
Speaker cable