Optika Italy B-1000-Serie Bedienungsanleitung Seite 15

7.4.3 B-1000TI-2 / 3 / 5 / 10
1. Place the splitter attachment of the multidiscussion
system and tighten the lock screw ① on the right
side of the frame. (Fig. 12)
2. Connect the 5Vdc power supply to the rear socket
of the splitter attachment. (Fig. 6).
3. Connect the first part of the extension tube to the
optical splitter. Insert the tube into the splitter all
the way down and screw on the black sealing ring
completely. (Fig. 14-15).
• Each connection is labelled with a letter
printed on both sides of the connection. Make
sure to match the letters in order to correctly
assemble the microscope.
Page 15
①
①
Fig. 12
Fig. 13
Fig. 14
Fig. 15