Troubleshooting; Technical Data - 3M 64396 Bedienungsanleitung

Functional problems are not always the result of unit defects!
Malfunction:
Extraction output impaired.
Unit will not start.
Plastic emptying bag is sucked
onto the fi lter
If the paper fi lter bag is inserted dust in
the tank with M vacuum cleaners
Do not intervene further, contact your local 3M distributor!
Storage: Fix the extraction pipes by inserting them into the special recesses on the reverse of the tank.
nominal output watt
max output watt
3
air fl ow* m /h/MG
low pressure* hPa/MG
air fl ow** m 3 /h/SE
low pressure** hPa/SE
sound pressure dB (A)
*on the blower **on the hose
3M Instruction Manual
75-078_DustExtraction.indd 11 75-078_DustExtraction.indd 11

TROUBLESHOOTING

Possible cause/ remedy:
Soiled fi lter
Paper fi lter full
Tank is full
Nozzle, pipe or hose is blocked
Plug in the power socket?
No mains power?
Power cable OK?
Unit hood closed properly?
Has the water sensor switched off ?
Set the knob to pos.
See point 5.3
Set the knob to pos.
See point 5.1
ACCESSORIES

TECHNICAL DATA

Class - Standard
Part No. 64396, 64397, 64398,
64404, 64405 & 64406
1200
1400
220
248
––
––
69,7
9
clean
exchange
Empty
clean
Class - M
Part No. 64400, 64401, 64402,
64408, 64409 & 64410
1200
1400
––
––
140
225
69,7
16.03.2010 10:47:43 16.03.2010 10:47:43
EN