Maintaining Your Car Seat; To Remove/Install And Clean The Upholstery - Orbit baby G3 Bedienungsanleitung

30 -
Instruction Manual - Car Seat + Isofix Base

Maintaining your car seat

Upholstery and infant head support must be properly attached when re-
•
installing.


To remove/install and clean the upholstery

□ Remove infant head support and shoulder pads Ⓦ. Unhook each corner of the
upholstery from the rim and pull it away from the seat shell.
□ Open the center panel of the upholstery by separating the hook and loop
fasteners and pass the shoulder straps underneath the upholstery through the
center panel.
□ Remove the crotch pad. Pull the crotch buckle through the slot in the upholstery.
Machine wash in cold water on a gentle cycle with a mild detergent, such as
Orbit Baby's Upholstery Wash. Washing inside a pillow case and in front-loading
washer is recommended. DO NOT USE BLEACH. Lay the upholstery flat to dry.
DO NOT machine dry.
⚠ WARNING ⚠
Group 0 +