Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Turn on the HMT-1
4
5
6
7
Press and hold the
power button for 3
seconds to turn on
the device.
Scan the Configuration QR Code from the HMT-1
5
6
7
1.
The HMT-1 will automatically launch into configuration mode.
2.
Point the camera at the QR code you generated in Step 1.
3.
The HMT-1 will detect the QR code and configure the device.
Note: Once the device connects to WiFi an update of RealWear Device Agent may occur.
Say What You See
6
7
8
The HMT-1 is controlled by voice and head motion.
Say what you see on the screen and move your head
to navigate. If you get stuck say Show Help.
Note: To change your language, press and hold the
action button on the side of the HMT-1. The language
selection will switch automatically, let go of the button
when the language you want is selected.
8
9
10
8
9
10
9
10
Adjust display pod so you
can clearly see all 4 corners
of the display and then lock
into position using ring.
Werbung
Inhaltsverzeichnis
