Werbung
Tighten the screws gradually by alternately tightening the screws that are diagonally across from one another
(after ensuring that the scale drum's temperature equals that of the machine).
Schrauben kreuzweise und schrittweise anziehen (nach Temperaturausgleich der Teilungstrommel).
Serrer les vis en croix et progressivement (après équilibrage thermique du tambour gradué).
Serrare le viti a croce e gradualmente (dopo il raffreddamento del tamburo).
Apretar los tornillos opuestos de forma alternativa y paso a paso (después de compensar la temperatura del tambor graduado).
ISO 4762 – 8.8 – M5
1.
M
= 0.1 Nm
d
2.
M
= 2.3 Nm
d
3.
M
= 4.75 Nm ± 0.3 Nm
d
12
ISO 4762 – 8.8 – M6
1.
M
= 0.1 Nm
d
2.
M
= 4 Nm
d
3.
M
= 8.1 Nm ± 0.5 Nm
d
Werbung
