Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Note:
Risk of malfunctions due to faulty installation!
If the knurled coupling nut is not tightened properly, the plug connection
may get loose over time. This may lead to a loss of functionality! Make sure
that all knurled coupling nuts of the connection cables are tightened!
Note:
Observe the flow arrow, it indicates the only possible flow direction.
Hold in place against the spanner flats of the sensors when tightening the
screw connections. The flow rate of 60 l/min may not be exceeded (potenti-
al damage to the turbine).
Function
The Hycleen Automation flow sensor is a measurement value receptor for
the capturing of the volume flow of liquids. The flow sensor must be con-
nected to a controller and is automatically identified as an external sensor
upon the start of the master. The flow rate of the sensors can be read out
on the master in liters per hour.
22
Werbung
