Sealed Air TASKI jet 38/50 Bedienungsanleitung Seite 63

Cleaning the brush roller
Attention:
Danger of injury due to sharp objects.
Wear gloves for your own protection!
Notice:
Check the brush roller for wear after every
use.
Bristles that are too short or a damaged
brush roller may damage the floor!
• Remove the side cover from the
brush housing.
• Slowly lift the roller holder with a
screwdriver.
• Remove the brush roller slowly.
• Remove the roller holder from the
brush roller.
The roller holder will be reused.
Notice:
Check the length of bristles before inser-
tion and replace the brush roller if neces-
sary.
Bristles that are too short or a damaged
brush roller may damage the floor!
• Clean the brush roller.
• Insert the brush roller into the brush
housing with the hexagonal opening
first.
The white marking must be aligned
with a horizontal surface (see im
age).
• Press the roller holder as far as it will
go.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
Notice:
Wind up the main cord loosely.
-
• Reinsert the side cover.
EN
61