Device Description - Beurer WL 50 Gebrauchsanweisung

• In the event of defects or operational faults, switch the
device off immediately and disconnect it from the mains
socket.
• Arrange the mains cable so that it is not a trip hazard.
IMPORTANT
• Protect the device from impacts, moisture, dirt, marked
temperature fluctuations and direct sunlight.
• Do not drop the device.
WARNING
Notes on handling batteries
• If your skin or eyes come into contact with fluid from a
rechargeable battery cell, flush out the affected areas
with water and seek medical assistance.
• If the battery leaks, put on protective gloves and clean
the battery compartment with a dry cloth.
• Protect batteries from excessive heat.
• Risk of explosion! Never throw batteries into a fire.
• Do not disassemble, split or crush the batteries.
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The in-
structions from the manufacturer and the specifications
in these instructions for use regarding correct charging
must be observed at all times.
• Fully charge the battery prior to initial use (see Chap-
ter 6).
• In order to achieve as long a battery service life as pos-
sible, fully charge the battery at least twice per year.

5. Device description

1 Sensor surface
2 Alarm 1 button
3 Alarm 2 button
4 Sleep button
5 Display button
6 Display
7 Mode button
1
2 3 4
5
11
11
8 button
9 button
10 button
OK
11 switch
On | Off
12 Micro USB connection
13 Charging LED
14 AUX connection
7 8 9 10
6
14
13
12