System Requirements And Software Installation - Snooper Ventura AVN S7000 Kurzanleitung

Configuration Security Code
It is also possible to protect the configuration settings using a security pin code. To
activate the security code access the Menu by touching the centre of the screen of
Ventura and then press the 'Configure' button. Next tap the 'Configuration Security Code'
icon and select 'Yes' to switch the function on. Press the 'Enter Code' button and enter the
4 digit code that you would like to use to protect the configuration settings and press 'OK' .
Once this setting has been activated you will need to enter this code each time you want
to amend the configuration settings on your Ventura.
NB. It is important that you do not lose or forget this code. If you forget this code you will
need to return your Ventura so that the code can be reset.
Register your Ventura on-line and gain access to Snooper's comprehensive database
of speed trap positions across Europe. Plus receive free system software updates.
Register now at www.snooperneo.co.uk

System Requirements and Software Installation

Before you can begin to download the database onto your Ventura, you will need to
install the Ventura Updater software provided on the CD ROM.
In order for the software to be installed successfully, there are certain minimum hardware
and software requirements needed.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of
32MB of RAM, a monitor with 256 (8-bit) colours or greater, a CD ROM drive, 20MB of free
disc space and a spare USB connection
Software Requirements
The software will only operate on the following Windows based operating systems:
Windows 2000, Windows XP, Windows Vista and, in addition, will only work with Internet
Explorer 6 or Netscape Navigator 6 or above.
NOTE: The Ventura Updater software does not support Windows 95, 98, Millennium or
Apple Macintosh operating systems.
15 • UK