Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fish Feeder
Please read through these instructions for use carefully before installing this device.
Key
10
sec
First of all, we would like to congratulate you on your purchase of the SuperFish Fish Feeder. You have selected an excellent
product.
Feeding your fish with an automatic feeder has many advantages. You get the most out of your fish by always precisely providing the correct
amount of feed. This ensures optimal growth and a prettier colour pattern, for example in Koi fish. As the feed is dosed in smaller amounts at
a time, this has a beneficial effect on the health of the fish, and on your pond. Unnecessary pollution of the water and additional strain on the
filter can be prevented if your fish eat all the feed that is provided.
With the programmable timer, it is possible to carry out fully automatic feeding between 1 and 24 times a day. The quantity of feed can be set
by adjusting the number of dosing seconds per hour. The number of dosing seconds per hour can be set between 0 and 120 seconds.
Advantages of the SuperFish Automatic Feeder:
- Less work
- Adjustable automatic feeding times
- Suitable for grain sizes between 2 and 9 mm.
- Mounting bracket included in the delivery
- Length of the power cable: 10 metres
- Less strain on the filter
- Feed container for 7 litres of feed
- Dutch product
Installation instructions
1 Remove the automatic feeder from the packaging and check that all parts are present (see Drawing 1).
2 Mount the bracket at the place where you would like to suspend the automatic feeder.
3 Fit the control box at the desired location. When mounting the control box, bear in mind that the wiring of the control box should first be
fitted through the bracket to ensure that the power cable is situated below the device.
4 Place the feeder in the bracket and fill it with the desired feed (7 litres of fish pellets of 2 – 9 mm).
5 Insert the plug in the wall socket with a safety ground and fitted with a residual current circuit-breaker.
First use
As soon as the automatic feeder is switched on by inserting the plug in the socket, the display will show tSEt, alternating with the time, which
has not yet been set (00.00). This means that the time must be set as a first step, see Drawing 3.
You enter the clock menu by holding down the button for 3 seconds. In this menu, it is possible to modify the hours of the day in steps of one
hour by briefly pressing the button. Press the button for 3 seconds as soon as you have reached the correct hour. Then you can set the minutes.
4
press briefly
press for 3 seconds
do not do anything for 10 seconds
selection confirmed
time of day
adjusting the dosing period
setting the timer
increase
decrease
EN
Werbung
