Alarm Setting - Celestron ELEMENTS trekguide 48006 Bedienungsanleitung

alarM Setting

• Press "T" button to navigate to Alarm Time Display ("AL"
icon displays on the LCD) Hold "T" button for 3 seconds to
enter alarm clock setting mode. Press "▼"or "▲"to change
setting, and press "T" button to confirm and move to next
setting.
aLtImeter anD Barometer
When batteries are inserted, the device will automatically
measure the barometer readings as well as the maximum
sea level pressure reading.
Set and reSet altiMeter (For altitUde)
Altimeter measures in either meters
or feet.
• Press "A" button to enter altimeter mode. Press "A" button
again to display the maximum altitude.
• When LCD displays current altitude, press and hold "A"
button for 3 seconds to enter setting. Press
adjust altitude, and press "MODE" button to confirm. Press
and at the same time, current altitude value will be
"▼" "▲"
reset to 0.
• When LCD displays maximum altitude, press
the same time and the maximum will be cleared and reset
to 0.
• The setting sequence is: Hour, Minute and Alarm ON / OFF.
• When the alarm is on, the symbol "
is off the symbol "
• When alarm goes off "
stop the alarm and if no button is pressed for 15 seconds
the alarm will automatically stop after 2 minutes.
Set and reSet Sea level preSSUre and
Weather ForecaSt iconS
• Press "B" button to enter Barometer mode. The LCD will
display the current barometric pressure and press the "B"
button again to display the sea level pressure.
• In the Sea Level pressure display, hold the "B" button down
for 3 seconds to enter the setting.
Press "▼"or "▲"to change the setting and press "MODE"
button to confirm and move to next setting.
• The setting sequence is as: sea level pressure, toggle
weather forecast icons.
• The weather forecast will start the first forecast 6 hours
or to
"▼" "▲"t
later after the current weather status is entered.
note: Barometric pressure and sea level pressure
measurement in mbar/hPa, mmHG or inHG. When sea level
pressure is changed, the altitude will adjust itself.
"▼"and "▲" at
" appears and when it
" disappears.
" will flash, press any button to
ENGLISH I
3