Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LCD DIspLay
1. Cardinal point when the compass in the north direction
2. Direction arrow
3. Temperature appears when not in compass mode
4. Low battery indicator
5. Appears when in Altimeter (Altitude) mode
6. Indicates maximum altitude
7. Display format of Day and Month
8. AM/PM
9. Year
10. Keypad is locked
11. Appears when sea level pressure is shown
Set Up
• 2 PCS CR2032 lithium batteries are included. When battery
is low, the battery low icon ( )
will be on. Use a small screwdriver to remove the screws
of the battery cover, remove the batteries with a thin knife
or screwdriver, place the positive(+) side of the batteries
upward, and then replace the screws.
Main FUnctionS and operationS
• Press the MODE key to switch mode between Clock, Date,
Year and Alarm Clock.
• Press A/▲, B/▼, C buttons to switch between:
ALTIMETER/BAROMETER/COMPASS MODES.
I ENGLISH
2
1
2
3
4
5
6
7
8
9
12. Appears when in Barometer pressure mode
13. Units of air pressure
14. Units of altitude appear in altitude mode
tiMe Setting
•
Press and hold "MODE" key for 3 seconds to enter settings.
Press
o change setting, and press "MODE" button
"▼"or "▲" t
to confirm and move to next setting.
• Setting sequence is as follows: 12/24 hour format, Hour,
Minute, Second, Year,
Month/Day sequence, Month, Day, Temperature unit,
Air Pressure unit, and Altitude unit.
• If no button is pressed for 15 seconds, the display will return
to previous mode.
• Press "C" button to exit the Time Setting Mode.
10
11
12
13
14
15
17
16
Werbung
Inhaltsverzeichnis
