Inhaltsverzeichnis
Werbung
19.After each use, pour any remaining water out of the sterilizer after it cools down.
20.Leave the sterilizer to cool down before storing it.
21.Move or clean the sterilizer after it has cooled down completely.
22.After sterilization do not reach and do not try to remove the hot objects from the
sterilizer.
23.Always wash your hands before touching the sterilized objects.
24.Do not expose the sterilizer to high temperatures, direct sunlight or direct hear
sources – open fires or heaters.
25.Do not place the sterilizer on hot surface.
26.Do not use the grill function of the microwave oven. If you have used the grill
function, before you start the sterilization, wait until the microwave oven has cooled
down before placing the sterilizer in it.
27.Check regularly the product for damages. Stop immediately its use if you find
such.
28.Do not try to modify the product or repair it by yourselves when damaged. For
advise, contact an authorized service center or the shop, from where you bought the
sterilizer.
29.When the product is not being used, store it in a dry and cool place, away from
direct heat sources, water or children reach.
30.The sterilizer is tested according to and complies with the Regulation EC No.
1907/ 2006 according to REACH.
1.Intended for sterilizing baby bottles/ cups, nipples, bottle rings, soothers etc.
2.Simultaneous sterilization of up to 5 bottles.
3.Applicable for all models of microwave ovens with Rated Power of 750W and above.
4.Bottle sterilization up to 8 minutes.
5.Light and easy to use – ideal for travelling
6.Fits bottles with height up to 15.5 cm
7.Dishwasher safe – top rack.
8.Size: Diameter – approximately 28 cm; Height: approximately 18 cm;
1.Cover
2.Basket for bottles and other objects for sterilizing
3.Body/ base of the sterilize
4.Measuring cup
5.Bottle tongs
6.Cover clips
Before using the product for the first time, clean the sterilizer well as described bellow:
1.Take out basket from the base.
2.Fill baby bottle or measure exactly 200 ml of tap water and pour it into the sterilizer base.
The amount of water must be exactly 200 ml. if it is more, the objects will not sterilize. And if the
water is not enough, the sterilizer or microwave oven will get damaged.
3.Place the basket in the base.
CHARACTERISTICS
PARTS – SEE FIGURE PD
BEFORE STARTING TO USE THE PRODUCT
10
Werbung
Inhaltsverzeichnis
