Symbols Used In The Manual - Crown CT15232 Originalbetriebsanleitung

working place in time and use means of individual pro-
tection�
• Operation may produce sparks and small metal par-
ticles, which can cause injury to the operator or to the
bystanders� Always wear means of individual protec-
tion (goggles and protective mask), as well as arrange
your working place in a proper way�
• Do not work materials containing asbestos� Asbes-
tos is considered carcinogenic�
• It is not allowed to use the power tool for cutting
workpieces made of magnesium or its compounds�
• Avoid stopping the power tool motor when under
load�
• Avoid overheating your power tool, when using it for
a long time�
After finishing operation
• The power tool can be removed from the workplace
only after the cutting disc has been switched off and
stopped completely�
• Never try to slow down the inertial rotation of the
cutting disc with the spindle lock or by applying effort
to the cutting disc lateral surface� If you use the spindle
lock for this purpose, the power tool will fail and your
warranty will be cancelled�
• The cutting discs can get very hot during operation -
do not touch them until they have cooled down�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol Meaning
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Wear protective gloves�
Symbol
Power tool designation
The power tool is designed for the dry cutting of metal
workpieces, sections, pipes, etc� in stationary mode�
The power tool is designed for right-handed users only�
English
18
Meaning
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Prohibited�
Attention� Important�
Round tube workpiece�
Square tube workpiece�
Rectangular tube workpiece�
Angle bar workpiece�
Double insulation / protec-
tion class�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Do not dispose of the power
tool in a domestic waste
container�