Herunterladen Inhalt Inhalt Diese Seite drucken

Hinweise Bei Störungen; Specifications - Mato 18V-S Betriebsanleitung

Accu-greaser
Vorschau ausblenden Andere Handbücher für 18V-S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Do not sharply bend high-pressure hose, regularly check for physically visible damage.
It is recommended to replace item after 3 years by genuine spare part.
When ordering spare parts, the following information is required:
Type specification, designation of the ET, order number
The following maintenance deadlines should be strictly observed to ensure trouble-free
operation.
Ordering spare parts:
High-pressure hose
Nozzle
Battery charger
Checking for loose
connections
Legibility and availability of
information
The motor is not
running.
6
Hinweise bei Störungen:
Device does not produce
Symptom
grease.
Device continues with
the production of
grease.
The battery will not
charge.
Operating voltage:
Operating pressure:
Flow rate:
7

Specifications:

Threaded connection
for gripper nozzle:
Grease gun battery
Temperature:
Grease of NLGI Class 000 to 2 (DIN 51818) can
be used.
Pastes without lubrication properties (with
abrasives) or silicon pastes must not be used.
Fluid media:
8
Disposal
12
GmbH & Co. KG
MATO
Before each use
The battery is empty or faulty.
The wiring to the motor is faulty.
The gun container is empty.
Mögliche Ursache
The grease supply has been
interrupted.
By filling with loose grease, air
bubbles become trapped in the
grease.
Charger without power supply.
The battery remains too hot.
Battery faulty or worn out.
18 V
approx. 400 bar
approx.100ccm/min
R1/8 "Operating
-18 to 50°C
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Grease-tainted parts and batteries do not belong in the dustbin!
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
annually
X
X
X
X
X
X
X
Charge or replace battery.
Remove the battery, dismantle the
handle and check for a loose
connection.
Check the level of the grease
Behebung
container.
Vent the gun.
Empty gun container and refill.
Vent the gun.
Check that the outlet has power.
Allow battery to cool before charging
Replace battery
Nomonal voltage:
Battery Type:
Capacity:
Weights: 1.500 mAh
Battery
High-performance battery grease gun
Complete set with case
Gun with battery and
grease container
Weights
Operating manual
Accu-Greaser 18V-S
According to the manufacturer
X
X
18 V
Lithium-Ionen
1.500 mAh/27Wh
4.000 mAh/72Wh
0,3 kg
4.000 mAh
0,6 kg
5.4 kg
3.1 kg

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis