Replacing The Batteries - Symbol 3100 serie Kurzübersicht

Replacing the Batteries

To replace the NiCd or NiMH battery:
1. Turn the terminal off.
2. Release the hand strap, unlock the battery compartment
door and remove it.
Hand
Strap
Battery
Adapter
Battery
Compartment
Door
3. Position the battery adapter in holding plug and press
into place.
4. Fit the NiCd or NiMH battery pack in compartment next
to adapter. Verify that removal strap is accessible (not
tucked under battery), before pressing battery in place.
Note: NiMH batteries cannot be charged in the terminal
through the Communications/Charger Adapter.
NiCd
Battery
Battery
Compartment
11
Strap