Notes On Disposal; Cleaning And Maintenance - Melitta LOOK Therm Perfection Gebrauchsanleitung

jug with closed lid in the appliance.
• Open the swing filter  to the left.
filter bag 1x4
• Fold a Melitta
®
and place it in the filter holder . Press the filter
bag into the filter holder by hand, to ensure a good fit.
• Put the ground coffee into the coffee filter. We
recommend using 6 g of coffee per large cup at a
medium setting of the AromaSelector
• Alternatively, you can vary the taste of the coffee
according to your personal preference using the
same quantity of coffee. For a milder coffee, turn
the AromaSelector to the left (
®
coffee, turn it to the right (
• Swing the filter back into the appliance. An audible
click tells you it is inserted properly.
• Turn the appliance on . Brewing begins.
• The appliance turns off automatically short after
brewing. This avoids unnecessary use of electricity
and saves energy. You can of course turn the machine
off manually at any time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance .
• With the help of the detachable inner  filter you
can dispose of the filter bag simply and easily.
5. Using the therm jug
• The brewed coffee flows through the central valve in
the insulated lid of the pot.
• To pour coffee press down on the sealing lever .
• Remove the lid simply by pressing the seals on the
side while lifting the lid up .

6. Cleaning and maintenance

External cleaning
• Switch off the machine before cleaning and disconnect
the power cable.
• Allow the appliance to cool completely before
cleaning it.
• Clean the parts that come into contact with coffee
(jug, filter holder, etc.) after each use.
• The housing can be cleaned with a soft damp cloth.
• The jug lid, the filter insert and the swing filter 
can be washed in the dishwasher.
• Do not use harsh or abrasive cleaning agents.
Descaling
The CALC button  lights up again if the appliance has
been turned off without descaling. The CALC button
will go off again only after the descaling programme has
been completely finished. Based on the water hardness
level you have set (see point 3) the descaling programme
should be run promptly after the CALC button 
lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using Melitta
Filter Coffee & Aqua Machines".
• Briefly press the CALC button , it will start to flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes.
• Attention: Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
off. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
at the embossed seam
®
® .
). For a stronger
).
„Anti Calc Liquid for
®
• When the descaling process is completed the light
on the CALC button will go off. The appliance will
turn off automatically.
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coffee. This will remove
any remaining limescale deposits.

7. Notes on disposal

• Appliances labelled with this symbol
to european guidelines for Weee (Waste electrical
and electronic equipment.
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
GB
are subject
9