Panasonic NC-ZF1 Bedienungsanleitung Seite 13

Fill water in the water tank,
3
then plug in and turn on the
power switch.
(For NC-ZF1)
• The power indicator will light up while brewing
coffee and turn it off automatically.
(For NC-DF1)
• Power indicator will light while the switch is on.
Note
• Do not fill the water tank with hot water.
(A lot of steam may spurt out.)
• Do not brew coffee when the water is below 2
or more than the maximum 8 on the scale.
• Do not add water while brewing.
• When water is added more than you desire,
please remove it by using another container.
To brew coffee consecutively
Repeat step 1~3.
• Wait for 5 minutes to add water in the water
tank.
(
If water is added too soon, steam may spurt
out.
(For NC-ZF1)
4
Remove the jug after light is turned
off.
(For NC-DF1)
After brewing is completed, turn off
the switch and remove the jug.
• Press down the lever on the jug lid to pour the coffee into
cups. (NC-ZF1 only)
Note
• Do not pull out the basket when jug is set on the plate.
(Coffee will drip.)
• Coffee is hot, remove the jug slowly.
(Hot coffee may spill out.)
• When the jug is removed immediately after brewing,
coffee may drip. In that case, please wait to remove the
jug for a while after brewing.
• When handling the jug with hot coffee in, do not open the
jug lid. Hot liquid may spurt out or drop on your hand. (It
may cause burns.)
• When removing the jug, pull it in line with the handle.
• To keep the coffee warm, leave the power switch in the on
position. (NC-DF1 only)
)
• For a better taste, keeping the coffee warm for a long time
is not recommended.
 After use
• Unplug the coffee maker after use.
When you have remaining water in the water tank
• Turn on the coffee maker and extract water completely
into the jug, then throw it away.
13