Transport, Packing, Location, Assembly - AHT M Serie Bedienungsanleitung

User manual M / MV / CT / CMV

6. Transport, packing, location, assembly:

AHT Cooling Systems GmbH – NL Deutschland
Sonntagshornstraße 19 · 83278 Traunstein
ATTENTION:
Read operating instructions!
This operating instruction is part of the device and must remain
there.
If possible, do not set up and expose the device
to direct sunlight!
The device is not suited for the application outside.
Avoid locating the device within the range of the outlets of
air conditions, the current of warm air, entrances or miscellaneous
places with strong air turbulences!
The location where the device is set up must be solid and level!
The use of extension cords or multiple plugs is not permitted.
If possible, leave the cooling display in its original packing until the
device is placed at its final destination.
Do not use any sharp objects for the removal of packing material
because this might damage plastics, patterns or varnish.
Damages of the cooling display must be registered and reported as
soon as possible (at best with picture documentation).
· Germany ·
Device is very heavy. Transport only with several
persons and appropriate equipment!
12
Tel. +49/(0)861/209 32-0 · Fax +49(0)861/209 29-90 · Email worldwide@aht.at