Operation; Cleaning And Care; Disposal - Powerfix Profi Z15003 Montage-, Bedienungs- Und Sicherheitshinweise

off again. Check again that all the screws,
bolts and fixings are firmly seated.

Operation

Q
Place the workpiece on to the base plate
j
against the rear stop
vice .
41
Note: Ensure that the workpiece lies against
the base plate
32
m CAUTION! DANGER OF INJURY! Ensure
that the length of the workpiece is at least half
the length of the stop
piece may become loose and slide out.
Set the vice so that the workpiece lines up
j
41
with the centre of the cutting disc.
Now switch on the angle grinder and press it
j
down on to the workpiece.
j Avoid any backwards movement and apply
even pressure on the workpiece.

Cleaning and care

Q
j Use a slightly moist, fluff-free cloth when you
are cleaning or polishing the product.

Disposal

Q
The packaging is made entirely of recycla-
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
8 GB/CY
79200_HR_GR_content.indd 8
32
and secure it with the
27
.
, otherwise the work-
27
9/3/2012 2:49:56 PM