Low Battery Indicator - Optimum Time Ultimate Event Watch Gebrauchsanleitung

LOW BATTERY INDICATOR

The timer is equipped with a low battery indicator located in the top left hand side of
the display. When the indicator is on, it is time to change the battery.
TO CHANGE THE BATTERY
1. Remove the timer from the outer clip.
2. Using a screwdriver to remove all 6 screws from the case back and remove the
case back from the case front to reveal the battery.
3. Remove the old Battery and replace with a new one making sure the +ve contact
faces upwards. (Avoid holding the battery so that your fingers touch both the +ve
& -ve contacts at the same time).
6
4. Replace the case back making sure that the O ring
seal is in the correct position.
5. Replace the four screws taking care not to overtighten
them and thus strip the thread.
ADJUSTING THE ELASTIC STRAP
There is a right way and a wrong way to adjust the elastic strap. Please take note to avoid
any chance of the strap coming undone.
1. Place the watch on the wrist and pass the elastic through the clasp from the bottom
to the top.
2. Pull the elastic to the required tightness and secure by pressing the clasp firmly closed.
3. Push the elastic loop over the spare length of elastic to keep the loose end tidy.
7